"Cerlic's objective is to contribute globally to minimize pollution to lakes, rivers and seas by developing, manufacturing and implementing measuring and control instrumentation that makes industrial and municipal processes more efficient”

BB2 Control Box

The BB2 is a powerful control box that can support a combination of up to four different sensors from the X-series measuring dissolved oxygen, suspended solids, pH, ORP and open channel flow. BB2 will only support one CTX sensor due to power requirements. CBX sludge blanket must use BB1 control unit. Weighing less than 3 lbs (1.4 kg), the BB2 is distinguished by a three-button panel used to navigate the intuitive software. The plug & play capabilities of the BB2 ensure an easy installation. Calibration is performed in just a few simple steps. 

Cerlic ITX-IL Inline Suspended Solids Sensor

ITX-IL Inline Suspended Solids Sensor

The ITX-IL In-Line Suspended Solids Sensor is the ultimate tool for effective process control supplied with 1 ½” SS isolation valve. Designed for up to 87 psig (6 bar) applications with built-in mechanical stop. The sensor is used for continous measurement of suspended solids in RAS, WAS, MLSS and Sand Filter Backwash monitoring in industrial plants. The measuring principle is a single beam of pulsed NIR-light. The LED light source pulses at 880 nm. In each installation the meter is calibrated using actual lab tests for up to five sample points. An automatic cleaning system with built-in flushing nozzles ensures accurate measurements with little maintenance.

ITX Submersible Suspended Solids Sensor

The ITX Suspended Solids Sensor is the ultimate tool for effective process control. The sensor is used for continous measurement of suspended solids in aeration basins (MLSS), return sludge troughs, SBR-systems, raw sewage, primary clarifier effluent and sewer monitoring in industrial plants. The sensor is an integral part of controlling solids retention time (SRT) or sludge age. The measuring principle is a single beam of pulsed NIR-light. The LED light source pulses at 880 nm and has a guaranteed life of at least three years. In each installation the meter is calibrated using actual lab tests for up to five sample points. An automatic cleaning system with built-in flushing nozzles ensures accurate measurements with little maintenance.

Cerlic ITX Submersible Suspended Solids Sensor
Cerlic O2X Dissolved Oxygen Sensor (DO)

O2X Dissolved Oxygen Sensor

Dissolved Oxygen Sensor O2X for continuous measurement of dissolved oxygen in SBR systems, aeration basins, aerobic digesters and final effluent with temperature output at no additional cost. The O2X is essential in saving energy associated with running blowers in aeration basins. The measurement of dissolved oxygen also assists in controlling nitrification/denitrification and leads to better process control. The oxygen electrode provides stable and reliable readings. New O2O optical DO electrode with Phase Shift Technology offers improved stability of DO readings and quicker response time. New cap coating is not damaged by UV light like current optical electrode designs. Cleaning of electrode with automatic cleaning feature using compressed air or water at 30 psig alleviates the need for frequent manual cleaning. No moving parts offers accurate measurement and very little maintenance.

CMC Microwave Total Solids Meter

Dissolved Oxygen Sensor O2X for continuous measurement of dissolved oxygen in SBR systems, aeration basins, aerobic digesters and final effluent with temperature output at no additional cost. The O2X is essential in saving energy associated with running blowers in aeration basins. The measurement of dissolved oxygen also assists in controlling nitrification/denitrification and leads to better process control. The oxygen electrode provides stable and reliable readings. New O2O optical DO electrode with Phase Shift Technology offers improved stability of DO readings and quicker response time. New cap coating is not damaged by UV light like current optical electrode designs. Cleaning of electrode with automatic cleaning feature using compressed air or water at 30 psig alleviates the need for frequent manual cleaning. No moving parts offers accurate measurement and very little maintenance.

Cerlic CMC Microwave Total Solids Meter
Cerlic CBX Stationary Automatic Sludge Blanket Meter

CBX Optical Sludge Blanket Meter

Cerlic CBX detects the blanket by means of a near infrared (NIR) suspended solids sensor, which travels through fluff layers until it fi nds the preset blanket solids concentration. Measuring suspended solids using a transmission method provides a true reading for the sludge content without either colour compensation or indirect assumptions. By combining Cerlic’s transmitting suspended solids meter with modern mechanics, the true sludge level can now be obtained without any risk of disruption from such things as floating sludge. Cerlic’s CBX may also provide a sludge profile of the media in which fluff layers can be seen. The meter is housed in a stainless steel cabinet for installation in a variety of environments and has automatic flushing of both sensor and cable, which means that maintenance is minimal.

MultiTracker

MultiTracker is a portable instrument for measuring parameters within water/wastewater plants as well as in other facilities. Sensors are available for sludge blanket, suspended solids and oxygen. Cable lenghts 4, 8, 12 or 20 m, connects easily to the instrument via a plug-in contact. The MultiTracker built-in log is able to store up to 250 measurements. To the same plug-in contact input as the sensor, a computer cable may be connected. The log can now easily be transferred to a computer and be handled via Cerlic Tracker Talk or MS Excel. Three calibration curves for different basins can be saved for simple and flexible use. Two different alarm levels can be set for min/max value with vibration and acoustic signal at set levels. Battery life is approximately 2 – 3 years at normal usage. The Multitracker is delivered in a practical case.

Cerlic Multitracker & Multiseries Sensors DO/Blanket/Suspended Solids

Multiseries gives new possibilities for portable and stationary measurement. All sensors in the Multiseries have full flexibility and can be used both as a portable meter and as stationary installed. As a user you can easily switch between the different sensors and between installations.

The Solido is a portable optical suspended solids meter using light transmission, which is the most accurate measuring principle for SS. Solido is designed to measure suspended solids in aeration basins, RAS, aerobic digesters in water and wastewater plants, as well as in other facilities. Two different alarm levels for the suspended solids may be set to indicate high and low levels. It is able to store up to 250 measurements with information about time, date and location, that may be named by the user.
The Blanko is a portable optical suspended solids meter designed to measure sludge blanket depth and suspended solids in clarifiers, thickeners, aeration basins, etc in water and wastewater plants, as well in other facilities. It is possible to display measured values as text or as a graphic image of the sludge profile. Two different alarm levels for the sludge blanket may be set to indicate fluff and sludge blanket levels. These may be displayed next to the graphic sludge profile. It is able to store up to 250 measurements as a graphic profile, each with information about time, date, location, that may be named by the user.
The Oxyduo is a portable oxygen meter designed to measure oxygen levels in aeration basins etc in water and wastewater plants, as well as in other facilities. It is possible to set two different levels for high and low alarms. Choose to connect the sensor to the portable MultiTracker unit of the stationary MultiFIx.